AOPTKE-APC series network server cabinet

Short Description:

1.Cabinet Standards: Compliant with GB/T3047.2-92; compatible with 19" international standards, metric standards, and ETSI standards.
2.Main Body Material: Constructed entirely from high-quality SPCC cold-rolled steel (Shougang Group); the main frame features a welded structure utilizing nine-fold profiles, while the front and rear doors feature a high-density perforated design.
3.Material Thickness: Vertical Rails (Square-Hole Strips): 2.0mm; Main Frame: 1.5mm; Side Panels: 1.2mm.
4.Surface Treatment: Degreasing, ceramic phosphating, and electrostatic powder coating.
5.Load Capacity: ≤ 1200 kg.
6.Protection Rating: IP20.
7.Door Ventilation Rate: ≥ 75%.
8.Optional Colors: RAL9004 (Black), RAL7035 (White).

AOPTKE-APC series network server cabinets| Product Features

1. Arched High-Density Mesh Front Door: The high-density mesh front and rear doors provide ample ventilation for servers and networking equipment.
2. Quick-Release Front and Rear Doors: The front door can be repositioned to the opposite side or swapped with the rear door. Both front and rear doors feature a simple lift-off design for easy removal.
3. Brush-Strip Cable Entry Ports: The bottom design allows cables to pass unhindered through a raised floor system. The top panel features pre-installed brush strips positioned toward the front of the cabinet, facilitating cable routing while simultaneously helping to contain airflow.
4. Two-Piece Side Panels: The two-piece side panel design reduces overall size and weight, making handling and equipment access easier. The side panels can be locked securely using a single key via the cabinet door mechanism.
5. Easily Removable Top Panel: The top panel can be removed via simple pull-pin hinges, allowing for convenient cable access during equipment installation—even after cabling has already been routed through the designated entry ports.
6. Integrated Lifting Eyelets: The top of the cabinet frame features integrated mounting points for lifting eyelets, allowing the cabinet to be safely hoisted and positioned using lifting mechanisms.
7. Casters and Leveling Feet: As a standard feature, the cabinet is delivered with both leveling feet and casters. The leveling feet can be quickly adjusted using a screwdriver or power drill, eliminating the need to use a wrench to tighten them from underneath the cabinet.
8. Dual-Opening Rear Door Design: The dual-opening rear door design helps optimize floor space utilization, requiring only minimal clearance to open and close.

A0PTKE-APC series network server cabinets| Product parameter

Product name

AOPTKE-APC Series Network Server Cabinet

Brief introduction

The AOPTKE-APC series floor cabinets are designed specifically for weak current engineering. Its intelligent design and professional engineering have achieved convenient installation and maintenance. Compliant with GB/T3047.2-92 standard, compatible with 19 inch international standards, metric standards, and ETSI standards

Protection level

IP20

Cabinet material

SPCC High-Quality Cold-Rolled Steel

Craft

Degreasing, water rinsing, silane treatment, and electrostatic powder coating.

DOOR

Single-opening mesh door at the front; double-opening mesh door at the rear.

Colour

RAL9004(BLACK）

model

AP-APC

Thickness

Square hole strip

2.0mm

Wheel tray

2.0mm

Front and Rear Doors

1.5mm

frame

1.5mm

Beam Installation

1.5mm

Other

1.2mm

Static load bearing capacity

2800KG

SIZE

volume

42U

volumeHeight
(including casters)
(mm)

1992

width(mm)

600

Depth(mm)

1070

AOPTKE K3 series network server cabinet